Step 6: Removing the Retainers

IMPORTANT
  • Make sure to remove all the retainers. Any that remain may cause faulty operation or breakdown when the power is switched on.
  • Store the retainers because they are needed again when transporting the machine.
Procedure
  1. Open the front, left, and right covers.
  2. Remove all the retainers.

    Removal of fixture
  3. Install retainers C and D, which you have removed, at the positions indicated in the figure for storage.
    Use the bolt removed in step 2.

    Retainer C


    ER-642_C-Retainer_fixing

    Retainer D

    Rotate retainer D by 180° and install it at the position that hides the gear.


    XP-640_D-Retainer_fixing
  4. Close the front, left, and right covers.