Step 10: Preparing the Cleaning Liquid

Prepare the cleaning liquid pouch, then set the pouch in cleaning cartridge.
IMPORTANT
  • Be sure to use a new cleaning liquid pouch.
  • Never, under any circumstances, use anything other than the specified type of cleaning liquid.

  • The cleaning liquid pouch must be purchased separately. Contact your authorized dealer or visit our website (https://www.rolanddg.com/).

  • Cleaning cartridges are consumable items. To purchase consumable items, contact your authorized Roland DG Corporation dealer or visit our website (https://www.rolanddg.com/).

Procedure
  1. Remove the cover of the cleaning cartridge.
    1. Keep the side with the arrow face up.
    2. Remove the cover by sliding it in the direction indicated by the arrow.

    DisassembleCartrige
  2. Set the cleaning liquid pouch into the cartridge case.

    Install the cleaning liquid pouch into the cartridge case.

    MEMO

    To set the pouch in the correct position, pass the protrusions on the cartridge case through the holes in the pouch.


    InsInkPouch
  3. Attach the cover to the cartridge case.
    1. Insert the protrusions (A) at the back of the cover into the holes in the cartridge case.

      Hook_CoverINK
    2. Push the cover to fit its hooks into the holes in the cartridge case.
      There are hooks in six locations. Check that all the hooks are seated in the holes and that the cover does not come loose from the cartridge case.

      Press_CoverINK