Using Media Color Settings

You can export the Color Settings of existing media to import these settings for use in editable media. The items that can be used are as follows.
  • Calibration Settings - Fine Tune and Apply: Single Color Limit and Output
  • Total Ink Limit - Max. Ink Limit : Total Ink
  • Profile Settings - Select Profile: Printer Profile
As an example, this section provides the procedure for reusing the CMYK Color Settings of an existing piece of media (Mode: White->CMYK) for the CMYK of the third layer of a piece of layering media (Mode: CMYK->White->CMYK).
WhiteCopy
A Reused media: Mode: White->CMYK*1
B Media to which reused settings will be applied: Mode: CMYK->White->CMYK
C Reused items: Calibration Settings, Total Ink Limit, and Profile Settings in Quality Settings
*1 If the ink mode of the reused media is White->CMYKOrRe, CMYKOrRe will also be applied to the target media.
Procedure
  1. Select the printer to use, and then click VW7_HamburgerMenu (the hamburger menu).
  2. Click Media Explorer.
    The Media Explorer window appears.
  3. Duplicate the existing media (which has Mode: White->CMYK) to reuse.
    1. Select the media to duplicate.
    2. Click VW7-ICON_DuplicationMedia.
      The Copy Media window appears.
    3. Enter the desired media name, and then click OK.
      The media is duplicated. The changed media name is displayed for Media Name.
  4. Click the duplicated media, the print quality to use, and the resolution to expand these items, and then select the ink mode (White->CMYK) to reuse.
  5. Click VW7-ICON_Customize or double-click the ink mode to use.
    The window changes.
  6. Click VW7-ICON_SavetoFile-Media.
    The window for selecting the folder in which to save the file appears. Change the file name and save the file in the desired folder.
    MEMO The file is saved with the .rccs extension.
  7. Click OK.
    The window changes.
  8. Click the layering media to which reused settings will be applied, the print quality to use, and the resolution to expand these items, and then select the ink mode (CMYK->White->CMYK) to apply.
  9. Click VW7-ICON_Customize or double-click the ink mode to apply.
    The window changes.
  10. Click Fine Tune and ApplySet Ink Limit or Select Profile.
    Layer at the top of the window can now be selected.
  11. Select 3.CMYK from Layer.
  12. Click VW7-ICON_OpenFile↑.
  13. Select the Color Settings (.rccs file) that you saved in Step 6, and then click Open.
  14. The message There are profiles that are already installed. appears. Select No.
    The Color Settings are applied to the third layer of the piece of layering media (Mode: CMYK->White->CMYK).
  15. Click OK.
    The window changes.
  16. In the Media Explorer window, click OK again.
    A window appears to confirm that you want to apply the set contents and carry out initialization. This window confirms that you want to apply the corresponding mode to the selected job.
  17. To apply the set contents, click Yes.
    You are returned to the main window.