Edit
| Item | Description | Refer to | ||||
|---|---|---|---|---|---|---|
| Spot Color Settings | A list of the preset spot color library names (Roland spot colors, DIC, TOYO, PANTONE) is displayed. With VersaWorks, spot colors other than Roland spot colors are replaced with CMYK for printing. You can create, delete, and duplicate spot color libraries, and can assign and convert spot colors. | Spot color | ||||
| Nearest Color Finder Library | The Nearest Color Finder Library list appears. You can delete unnecessary results as well as readjust them and use them on other computers. | Adjusting the Output Color of a Spot Color: Nearest Color Finder | ||||
| Special Color Settings | Displays a list of special color library names. Detects the specific colors in a job by color value (RGB or CMYK) and replaces them with color values defined in VersaWorks. | Special Color | ||||
| Simulation Profile Management | Configures a profile to match the output colors of different printer models. | Matching Different Printer Output Colors | ||||
| Preferences or Preferences | This is composed of five tabs (General, RIP and Print, Measurement Instrument, Update, and Linking) and configures the overall settings of VersaWorks. | VW7 First Step Guide | ||||
| General | Configures general settings such as Language and Unit and Preview . | |||||
| Language and Unit | You can set the language and unit to display in VersaWorks. After the language is changed, you have to restart VersaWorks. | |||||
| Language | Select the display language from [English], [Chinese_Simplified], [Chinese_Traditional], [French], [German], [Italian], [Japanese], [Korean], [Portuguese], [Spanish], [Russian], [Turkish], or [Arabic]. Default value: Language selected at the time of installation |
|||||
| FontSize | Select Large, Standard, or Small. Default value: Standard |
|||||
| Unit | Select the display unit from mm, cm, and inch. Default value: mm |
|||||
| Theme |
Select Dark or Light for the window theme. Default value: Dark |
|||||
| Preview | You can select the quality of the preview image from High Quality, Standard, and Low Quality. Default value: Standard |
|||||
| Quality | ||||||
| Enable Monitor Proofing | When this checkbox is selected, the colors in the preview display will be closer to those in the printed materials. Default value: Off |
|||||
| Monitor Profile | Select the RGB profile to display the preview with colors that closely approximate the actual output colors. Select from the AdobeRGB1998.icc, sRGB Color Space Profile.icm, or Roland icc profile. | |||||
| Queue | You can display the queue folder name (A to E) in the preview image. Default value: Selected |
Hiding the Queue Folder Identification in the Layout Window | ||||
| Show Queue Identifier in Layout Window | ||||||
| RIP and Print | Configures settings related to the RIP and print processing. | |||||
| RIP Speed Settings | When multiple printers are connected to VersaWorks, you can set the number of RIP processing operations to perform simultaneously. Default value: 1 (when only one printer is registered) or 2 to 4 (when multiple printers are registered) |
Setting the Number of Simultaneous RIP Processing Operations | ||||
| Max. # of concurrent RIP processes | ||||||
| Memory Amount |
Adjusts the amount of the computer's memory that is used during print data importing, processing by the RIP, and output. Default value: 1024 MB |
Increasing Memory | ||||
| Print Options | Sets the print count and the warning when the amount of remaining ink is low. | |||||
| Max. # of Concurrent Outputs | Sets the number of printers where output will be performed simultaneously. Default value: 1 |
Setting the Number of Simultaneous Printing Operations | ||||
| Configure Advanced Print Settings |
When this checkbox is cleared, the specified job is printed only once at all times without specifying the print count. Default value: Selected |
Printing Only Once at All Times | ||||
| Show warning about ink shortage on print command |
A warning is displayed at print start when the amount of ink remaining is low. Default value: Selected |
Setting Warning Displays According to the Amount of Remaining Ink | ||||
| Measurement Instrument | Sets the type of measurement instrument to use in Use [For Color Charts], For Spot and Special Colors, and For Printer Color Matching. | Setting the Measurement Instrument to Use | ||||
| Model |
Select the model to perform color chart measurement for. Select from [X-Rite i1Pro / Pro 2 / Pro 3], [X-Rite i1Pro 3 Plus], [X-Rite i1iO / iO 2 / iO 3], [X-Rite i1iO 3 Plus], [X-Rite i1iSis], [Barbieri Spectro LFP qb], and [Barbieri Spectro pad]. Default value: [X-Rite i1Pro / Pro 2 / Pro 3] |
|||||
| For Color Charts | ||||||
| Model |
Specifies the model to use when creating or adjusting a spot color or special color to reproduce the desired color. Select from [X-Rite i1Pro / Pro 2 / Pro 3], [X-Rite i1Pro 3 Plus], [Barbieri Spectro LFP qb Spectral unit], and [Barbieri Spectro pad]. Default value: [X-Rite i1Pro / Pro 2 / Pro 3] |
|||||
| For Spot and Special Colors | ||||||
| Model |
Specifies the model to use for the printer color match function that matches output colors which are slightly different with each printer. Select [VW-S1]*1 or Use [For Color Charts]. Default value: Use [For Color Charts] |
|||||
| For Printer Color Matching | ||||||
| Update | Automatically obtains VersaWorks updates and notifies the user. Default value: Selected |
Update | ||||
| Update Settings | ||||||
| Check for Updates Automatically and Notify | ||||||
| Linking | Links with external applications. Default value: Selected |
Checking the Link Settings with External Applications | ||||
| Linking | ||||||
| Link with External Application | ||||||