Queue Properties Window
This is used to make settings (dedicated settings such as specific media or request details) common to all print data placed in the queue folder. In cases such as when the media used or printing specifications are the same, configuring the queue property settings will eliminate the need to configure the job settings for each print data.
Queue Properties window opening method
Click 
for the queue folder to be used.
The screen shown below appears.
Details of the Queue Properties window
Clicking the tabs on the left side of the window displays the associated settings on the right side. Settings can also be configured separately for each queue folder. For example, the print quality can be different for each folder and the settings can be different for the RIP server and client. Also, to process jobs automatically, be sure to complete all the settings in the Queue Properties window.
The settings in this window are applied to all jobs unless the settings are changed in the Settings window.
The following settings cannot be changed from the Queue Properties window. Configure these settings from the Settings window.
- H
- Orientation
- , Special Color Plate Correction
- Clip and Tile
This setting may not be possible depending on the entered image file (job).
Settings changed in the Queue Properties window are not applied to jobs that were already in the job list before the settings were changed. To apply these changes, right-click the job to which you want to apply the changes and select .