Switching the Layout Area View on the Job Settings Window

This section explains how to switch the orientation of the preview displayed in the Settings layout area.

Origin View User View
Icon VW7_Preview Orientation_Origin Viewpoint1 VW7_Preview Orientation_User Perspective1
Layout area
emd1726707008547
VW7_Preview Orientation_User Perspective
MEMO Even if this setting is changed, the orientation of the preview displayed in the layout area in the center of the main screen will be Origin View.
Procedure
  1. Use one of the methods below to display Settings.
    • Double-click the job to set.
    • Right-click on the job to set, then click Edit Design - Settings.
    • With a job selected, click VW7_JobMenu1 on the left side of the job tool area, and then click VW7_CustomizeSettings.

    The Settings window appears.

  2. Click the view icon at the bottom of the layout area.
    • VW7_Preview Orientation_Origin Viewpoint1: Origin View

      The preview is displayed with the print origin set to the top-left corner.

    • VW7_Preview Orientation_User Perspective1: User View

      The preview is displayed with the orientation of the data printed from the printer (rotated by 180 degrees from the orientation of the print data).

  3. Click OK.
    The Settings window closes.
    MEMO The setting values of Position , Orientation, etc. are changed to the value of Origin View.