Correcting the Position of Spot Color Plates

This section explains how to correct the position of an image printed using spot color ink. Depending on the printer, this function may not be displayed.
Procedure
  1. Click for the queue folder that you want to use.

    The Queue Properties window appears.
  2. Click .
  3. Use Mode under Quality Settings to select the mode including the spot color.
  4. Click .
  5. Use the Special Color list under Special Color Plate Correction to select the spot color ink to correct.
  6. Click Test Print under Position Correction.
    The Test Print dialog box appears.
  7. Select Pattern Settings.
    • Simple
      • Select this to make rough adjustments to position misalignments.
    • Details
      • Select this to make detailed adjustments to position misalignments.
  8. Click OK.
    A test pattern is printed.
    • Correction position and printing position in the horizontal direction

    • Correction position and printing position in the vertical direction

  9. Enter the Horizontal and Verticalcorrection values.
    Select the values on the printed test pattern that make the misalignment between A (the black line) and B (the spot color line) the smallest. Enter the C values (which represent the Horizontal and Vertical correction values) written on the test pattern.

    A Black line (reference line)

    B Spot color line

    C Correction value

    IMPORTANT: The test pattern correction values differ for each piece of data. Set the correction values for each piece of data.
  10. Click OK.
    If you have to adjust the size of the spot color printing data, proceed to "Correcting the Size."
    IMPORTANT: These settings can be customized per job using the Job Settings window.