Mark
Sets the details when marks and job information are added to and printed with the job.
| Item | Description | Refer to | ||
|---|---|---|---|---|
| Marks | Configures the crop mark, margin mark, and other settings. | |||
| Type | Configures the settings for adding a variety of marks. | Adding Trim Marks or Margin Marks | ||
| No Marks | Trim marks and margin marks are not printed. | |||
| Trim Marks | Prints trim marks added at the four corners of the job. | |||
| Margin Marks | Leaves margins around the job and prints the margin marks at the four corners of the margin. | |||
| FOTOBA Cutline Marks | Adds and prints specialized cutting marks when using Fotoba International S.R.L.'s finishing cutters. | |||
| Crop Marks (Print&Cut Alignment) | Specifies the crop mark setting range. However crop marks cannot be added when the image width is less than 60 mm (2.36 in.). | Applying Crop Marks Individually to Multiple Images | ||
| Entire Area | Adds crop marks to the entire image. However the crop marks are automatically printed by the printer. Therefore the crop marks are not displayed in the preview. | |||
| For Each Row | Crop marks will be applied with the row of images treated as a single group. | |||
| For Each Data Entry | Crop marks will be applied to each individual image. | |||
| Job Property Label | This is a method of printing information such as the print settings and the print date under the image. | Printing the Job Properties | ||
| Print Job Properties | Turn this on to print the job information. | |||
| File Name | Prints the file name. | |||
| Layout | Prints the number of copies and scale. | |||
| Quality Settings | Prints the current quality settings. | |||
| Color Settings | Prints the details of the color settings. | |||
| Printer Color Match | Prints the color matching information. | |||
| File Format | Prints the settings of the spot colors and special colors (only when the conversion is enabled). | |||
| Device Controls | Prints the feed calibration (only when Use Printer Settings is not selected). | |||
| Job Management | Prints the job handling after printing. | |||
| Clip and Tile | Prints the location of the tile (clipped location and tile size for a clipped image). | |||
| Spot Color | Prints the generated pattern of the automatically generated plate, the plate density, and the corrected value. | |||
| Date/Time | Prints the date and time that the job was processed. | |||
| Notes | Prints the text entered in the input field. | |||