Applying the Tone Curve Adjustment to Other Jobs

This section explains how to save the tone curve adjustment settings as a Roland curve file (.rcv) and apply them to another job. The job settings and queue folder settings can also be saved.
Procedure
  1. Adjust the tone curve according to the information given in Adjusting the Tone Curve
  2. In the Tone Curves window, click Save….
    Enter a name, and then click Save…. The tone curve (.rcv) is saved.
  3. Click OK.
    The Tone Curves window closes.
  4. Click OK.
  5. If multiple printers are connected to the computer, select the printer that you want to apply the saved tone curve to.
  6. Perform the operation shown below according to where the tone curve is being applied.
    • Job: Double-click the job to open the Job Settings window.
    • Queue folder: Click for the queue folder to open the Queue Properties window.
  7. Click .
  8. Click Edit Tone Curves.
  9. Click Load….
    Load the Roland curve file saved in step 2.
  10. Click OK.
    The Tone Curves window closes.
  11. Click OK.
  12. Add the job to the job list.
    The same settings of the tone curve adjusted in step 1 are applied to the job.