Matching Different Printer Output Colors

This section explains how to add profile settings to match the output colors of different printer models.

The overall procedure for setting a simulation target profile is shown below. For information on 1. and 3., refer to the instruction manual of the profile creation software.
  1. Create the calibration chart printing data using profile creation software.
  2. Output the calibration chart from the printer to use as the color match source.
  3. Load the calibration chart in the profile creation software and create the simulation profile.
  4. Load the simulation profile in VersaWorks.

    Refer to Adding Simulation Target Profiles for details.

  5. Apply the simulation profile to your printer, and then match the output color to the color match source printer.

    Refer to Selecting the Printer Profiles for details.