Using Sticky Media

This setting is used to peel off the media before starting printing when using media that sticks easily to the platen. This setting is effective to prevent media jams.

Note, however, that peeling off the media may cause unstable media feed. Leave this menu item set to Disable unless you specifically need to change it.

Procedure
  1. Set up the media.
  2. Tap Panel_Icon_Menu.
  3. Tap Media Settings - Other Media Settings - Media Sticking Prevention.
  4. Select Enable.
  5. Tap Save to confirm your entry.
  6. Tap Panel_Icon_Home to return to the home screen.
    MEMO

    • Default setting: Disable

    • Depending on the RIP software you are using, you can also configure this setting in the RIP software. When you have configured the setting in the RIP software, the machine's setting is ignored.