3. Perform a cutting test.

Procedure
  1. Set up the media for which operations before cutting output, such as lamination, is complete.
  2. Tap AP-640_Panel_Icon_MENU.
  3. Tap Media Settings - Cutting Settings - Crop Cut Position Adjustment.
  4. If Separate Test for Printing/Cutting with Crop Marks is off, tap VG3_Panel_Icon_Toggle_OFF to turn it on.
  5. Tap Execute next to Cutting Test.
    The Move the blade over a crop mark. screen appears.
  6. Tap AP-640_Panel_Icon_UP, AP-640_Panel_Icon_DOWN, AP-640_Panel_Icon_LEFT, or AP-640_Panel_Icon_RIGHT to move the center of the blade over the crop marks to use in the cutting test.
    The center of the blade should only be over the crop marks, and does not need to be aligned with the center of the crop marks.

    VG3-ClopMarkSet

  7. Tap Execute.
    The cutting test starts.