Use Middle Pinch Rollers When Pulling Back or Feeding Media
Middle Pinch Auto Raise/Lower is a function that causes the middle pinch rollers to automatically rise when media is pulled back, performs overprinting and cutting while they are raised. However, if you are performing lengthy printing or using non-resilient media, the media will be skewed or will come loose, which may have an effect on the output quality.
If you set Middle Pinch Auto Raise/Lower to Disable, the middle pinch rollers will press down on the media while moving, thus preventing skewing or coming loose. However, because the middle pinch rollers are pressed against the printed surface, it is easier for the rollers to leave a trace on the printed surface. Before pulling back the media, make sure to dry it thoroughly.
Procedure
- Load the media.
- Tap .
- Tap .
-
Select Disable.
The middle pinch rollers will lower during media feeding and pullback, pressing down on the media while moving.
- Tap Save to confirm your entry.
-
Tap to go back to the original screen.
MEMO
- Default setting: Enable