Insufficient Media Width

The print data is larger than the media width. Continue output?

This message appears when the size of the printing data is larger than the printing area of the loaded media.

To continue performing output without making corrections, tap Continue Output. At this time, the portion extending beyond the printing area is not output.

To cancel output, tap Cancel. Make the printing area wider, for example, by replacing the media with a larger piece of media, and then send the data again.

MEMO There is no limitation on the size of the data in the media-feed (FEED) direction.
Crop marks cannot be added because the print data is larger than the media width. Continue output?

This message appears when one of the following situations is detected.

  • The size of the data with crop marks is larger than the printing area of the loaded media.
  • The width of the printing data is 60 mm (2.36 in.) or less.
To continue performing output without making corrections, tap Continue Output. The data is output without printing the crop marks.

To cancel output, tap Cancel. Make the printing area wider, for example, by replacing the media with a larger piece of media, and then send the data again.

The size of the data being output is too small.

Make the horizontal-direction (scan-direction) size of the data at least 60 mm (2.6 in.). To continue performing output without making corrections, tap Continue Output. At this time, the data is output without printing the crop marks.

To stop output, stop sending data from the computer, and then raise the loading lever. Increase the size of the data, and then send the data again.

MEMO There is no limitation on the size of the data in the media-feed (FEED) direction.