Jump to main content
Setup Guide
Introduction
Installation
Appendix
INDEX
Search
Home
Installation
1. Assembly and Ink Filling
Step 10: Initial Settings and Ink Filling
Introduction
Installation
1. Assembly and Ink Filling
Checks before Operations
Step 1: Assembling the Stand
Step 2: Attaching the Printer Unit and the Stand
Step 3: Installing the Media Holders and Media Stays
Step 4: Assembling the Media Take-up Unit
Step 5: Installing the Drain Bottle
Step 6: Removing the Retainers
Step 7: Adjusting the Ink Tube and Affixing a Label
Step 8: Connecting the Cables
Step 9: Preparing the Cleaning Liquid and the Ink
Step 10: Initial Settings and Ink Filling
1. Make the initial settings.
2. Set the cleaning liquid in its slot, and then select the ink type.
3. Fill the machine with ink.
2. Installing the Cutting Tool
3. Network Settings
4. Downloading and Installing Software
Appendix
Step 10: Initial Settings and Ink Filling
1. Make the initial settings.
2. Set the cleaning liquid in its slot, and then select the ink type.
3. Fill the machine with ink.
Introduction
Installation
1. Assembly and Ink Filling
Checks before Operations
Step 1: Assembling the Stand
Step 2: Attaching the Printer Unit and the Stand
Step 3: Installing the Media Holders and Media Stays
Step 4: Assembling the Media Take-up Unit
Step 5: Installing the Drain Bottle
Step 6: Removing the Retainers
Step 7: Adjusting the Ink Tube and Affixing a Label
Step 8: Connecting the Cables
Step 9: Preparing the Cleaning Liquid and the Ink
Step 10: Initial Settings and Ink Filling
1. Make the initial settings.
2. Set the cleaning liquid in its slot, and then select the ink type.
3. Fill the machine with ink.
2. Installing the Cutting Tool
3. Network Settings
4. Downloading and Installing Software
Appendix
Feedback
Was this information helpful?
1
2
3
4
5
NO
YES
Any additional feedback to help us improve.
Feedback
Thank you
