3. Set the blade force.

For high-quality cutting, perform a cutting test to check the cutting quality for the media and adjust the blade force.
Procedure
  1. Press [▶] to select "NEXT".


  2. Press [ENTER] to confirm your entry.
  3. Press [▶] to select "NEXT".


  4. Press [ENTER] to confirm your entry.
  5. Press [▶] to select "NEXT".


  6. Press [ENTER] to confirm your entry.
  7. Press [◀] to select "SET".


  8. Press [ENTER] to confirm your entry.
  9. Press [◀] to select "SET".


  10. Press [ENTER] to confirm your entry.
    The test pattern is cut.

    You can select "NEXT" and press [ENTER] to skip the current menu and proceed to the next menu.

  11. Peel off the two cut shapes (a circle and a square).


  12. Check how the two shapes peel off.
    • Two shapes are peeled off together/backing paper is also cut
      Press [◀] to select "SET".


    • Two shapes are peeled off separately
      Press [▶] to select "DONE".


  13. Press [ENTER] to confirm your entry.
  14. Press [▲] or [▼] to adjust the blade force.

    • If the two shapes are peeled off together → increase the blade force.

    • If the backing paper is also cut → reduce the blade force.



  15. Press [ENTER] to confirm your entry.
    The test pattern is cut again. Check the result.
  16. Check how the two shapes peel off.
    • Two shapes are peeled off together/backing paper is also cut
      Press [◀] to select "SET".


    • Two shapes are peeled off separately
      Press [▶] to select "DONE".


  17. Press [ENTER] to confirm your entry.

    • If you select "SET", the test pattern is cut again. Go back to step 12 and perform the setting again.

    • If you select "DONE", proceed to step 4. Save the settings as a preset..