4. Save the settings as a preset.

Procedure
  1. Press [▶] to select "NEXT".


  2. Press [ENTER] to confirm your entry.
  3. Press [▶] to select "NEXT".


  4. Press [ENTER] to confirm your entry.
  5. Press [ENTER] when the following screen appears.
    These three settings are ignored for output data designed only for cutting. Press [ENTER] and proceed to the next step.






  6. Press [◀] to select "SAVE".


  7. Press [ENTER] to confirm your entry.
    If you select "NEXT" and press [ENTER], the screen in step 12 is displayed and the settings you have selected up to this point are not saved as a preset. However, they will remain as the current setting values for the machine.
  8. Press [▲] or [▼] to select a destination to save the preset.
    You can select a name from NAME1 to NAME8.


  9. Press [ENTER] to confirm your entry.
  10. Set the name.
    1. Press [▲] or [▼] to select a character.
    2. Press [▶] to move to the next character.
    3. Set the following characters in the same way.
      You can enter up to15 characters.


  11. Press [ENTER] to confirm your entry.
  12. Press [MENU] to go back to the original screen.


    This completes the operation of the "MEDIA SETTING" menu.