Step 3: Output to the Printer from VersaWorks

Procedure
  1. 1. While holding down the Ctrl key, select the CMYK + matte and gloss jobs.
    UVguide_VW_selectjobs
  2. Click .

    The Advanced Print Settings window appears.

  3. Set the print count.
  4. Click Print.
    Processing by the RIP and printing are performed. When the CMYK and matte printing finish, the following message appears.
    MENU_FINISHED_PRINT
    Point: If the machine is set to "PRT CONTINUE," the above message does not appear, and it is not necessary to press [ENTER] in step 5.
  5. Press [ENTER].
    The gloss printing starts. In the job list, UVguide_VW_printfinish is displayed next to jobs that have been printed.