Setting the Base Point

Set the base point in order to determine the area on the loaded media in which to print (the output area).

The base point () indicates the right edge of the output area (). (: Media feed direction, : print-head carriage movement direction) You can print without setting the base point, but setting the output area enables you to use media without being wasteful and also to print on the targeted location.

Set the base point for each individual page. When the printing of one page finishes, the base point returns to its default value.



MEMO

  • Note that the left and right positions are not restored to their defaults for test patterns.

Procedure
  1. Set up the media.
  2. Tap VG3_Panel_Icon_MOVE-POSITIONMove.
    The movement screen appears.
  3. Tap AP-640_Panel_Icon_UP, AP-640_Panel_Icon_DOWN, AP-640_Panel_Icon_LEFT or AP-640_Panel_Icon_RIGHT to move the center of the blade to the position that you want to set as the base point.
    Tap AP-640_Panel_Icon_UP or AP-640_Panel_Icon_DOWN to move the media. Tap AP-640_Panel_Icon_LEFT or AP-640_Panel_Icon_RIGHT to move the cutting carriage.

    VG3-BasePointSet

    • : Output area
    • : Base point (right edge of the output area)
  4. Once the position has been decided, tap Set Base Point Here to confirm it.
    The base point position is updated, and you are returned to the home screen.
    MEMO The display of the icon on the home screen changes to indicate that the base point position has been updated.
    BasePointSetting