Setting the Speed of Automatic Media Feeding to External Devices

This setting makes it possible to adjust the speed media is automatically fed to external devices such as during cleaning.
Procedure
  1. Tap AP-640_Panel_Icon_MENU.
  2. Tap Preferences - Media Feed Amount to External Device - Automatic feeding method.
  3. Select one of the following.
    • Quality Priority

      Feed the media at the same speed as when printing.

    • Cost Priority
      Follow the steps below to set the feed speed. The feed speed can be set at a lower speed than when printing, helping to reduce the amount of media used.
      1. Tap AP-640_Panel_Icon_MINUS AP-640_Panel_Icon_PLUS to set the speed at which the media is fed to the external device.
      2. Tap OK.
  4. Tap Save.
  5. Tap Save to confirm your entry.
  6. Tap AP-640_Panel_Icon_HOME to go back to the original screen.
    MEMO
    • Default settings
      • Quality Priority
    • When Cost Priority is selected, the default value is as follows: 10 mm/sec (0.39 in./sec)