Operation Panel
| No. | Name | Details |
|---|---|---|
| Status bar | Displays the printer status and indicates the next operation. | |
| Home | Displays the home screen. | |
| Menu | Displays various setting menus. | |
| Notifications | Displays important information. When there are notifications, their number is displayed next to the icon. | |
| Sub power | Controls the power to the operation panel. | |
| Media information | Displays the media name, media width (W), and remaining media (L). This information is only displayed when media has been set up and there is media remaining. Tap the media width (W) or the remaining media (L) to display the Remaining Media Management screen on which you can set the remaining media. | |
| Amount of Ink/Cleaning Liquid Remaining | Displays the amount of ink remaining in each cartridge and the amount of cleaning liquid remaining in the cleaning liquid cartridge. If it is time to replace an ink color or a cleaning liquid cartridge,  is displayed next to the corresponding ink or cleaning liquid cartridge. Tap this icon to display the detailed information for the ink/cleaning liquid. | |
| Heater Temperature |
The print heater and dryer temperatures are displayed as current temperature/set temperature. Tap one of these items to display a screen for:
| |
| Media Feed |
To feed media to an external device, tap During automatic feeding, tap | |
| Setup/Cancel Setup |
Starts/cancels the setting up of the media. |
|
| Cleaning/Nozzle Drop-out Test | Displays the menu related to the printing test and cleaning for the nozzle drop-out check. | |
| Blade Adjustment | Sets cutting conditions. This is only enabled when media has been set up. | |
| Move | Feeds the media and moves the carriage. You can also set the position moved to as the right edge of the output area (the base point). Adjusting the Output-start Location | |
| Sheet Cutting |
Activates the separating knife, allowing the media to be separated and perforated lines to be cut. Perforated cutting for each print data eliminates the need to separate the media each time. Do this and you can feed the media to an external device, thereby reducing media waste. |
to pull out a certain amount of media (tap 
to pull back the same amount of media). While media is being pulled out/pulled back, tap 
to abort the operation.
to pause or 
to resume the operation. You can also turn automatic feeding on/off as well as set the amount to pull out/pull back and the automatic feeding method.