Specifications
| Printing method | Piezo ink-jet method | |
| Media | Width | 182 to 762 mm (7.2 to 30 in.) |
| Thickness |
Maximum 1.0 mm (39.3 mil) with liner, for printing Maximum 0.4 mm (15.7 mil) with liner and 0.22 mm (8.6 mil) without liner, for cutting |
|
| Roll outer diameter | Maximum 250 mm (9.84 in.) | |
| Roll weight | Maximum 30 kg (66.1 lb.) | |
| Core diameter | 76.2 mm (3 in.) or 50.8 mm (2 in.) | |
| Printing/cutting width*1 | Maximum 736 mm (28.9 in.) | |
| Ink | Type | S-PG2 INK 500 ml cartridge |
| Color |
Five colors (cyan, magenta, yellow, black, and white (2 cartridges)) |
|
| Printing resolution (dots per inch) | Maximum 1,200 dpi | |
| Cutting speed | 10 to 300 mm/s (0.39 to 11.8 in./s) | |
| Blade force*2 | 30 to 500 gf | |
| Blade | Type | Roland CAMM-1 series blade |
| Offset | 0.000 to 1.500 mm (0.0 to 59 mil) | |
| Software resolution (when cutting) | 0.025 mm/step (0.98 mil/step) | |
| Media heating system*3 |
Print heater set temperature: 30°C to 40°C (86°F to 104°F) Dryer set temperature: 30°C to 50°C (86°F to 122°F) |
|
| Connectivity | Ethernet (100BASE-TX/1000BASE-T, automatic switching) | |
| Power-saving function | Automatic sleep feature | |
| Power requirements | 100 - 120/220 - 240 Va.c. 50/60 Hz 6.4/3.0 A | |
| Power consumption | During operation | Approx. 840 W |
| Sleep mode | Approx. 70 W | |
| Acoustic noise level | During operation | 63 dB (A) or less |
| During standby | 58 dB (A) or less | |
| Dimensions (width × depth × height) | 2,032 mm × 748 mm × 1,415 mm (80 in. × 29.5 in. × 55.8 in.) | |
| Weight | 135 kg (298 lb.) | |
| Environment | During operation*4 | Temperature: 20 to 28°C (68 to 82.4°F), humidity: 40 to 60%RH (no condensation) |
| Not operating | Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (no condensation) | |
| Included items | Dedicated stand, power cord, media holders, separating knife, replacement blade, cleaning liquid, drain bottle, User's Manual, software (VersaWorks, Roland DG Connect), etc. | |
*1 The length of printing or cutting is subject to the limitations of the application software.
*2
- 500 gf is the maximum instantaneous blade force.
- The blade force must be adjusted according to details such as the media thickness.
*3
- Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
- Depending on the ambient temperature and the media width, the set temperature may not be reached.
