Jump to main content
Setup Guide
Introduction
Installation
Appendix
INDEX
Search
Home
Installation
1. Assembly and Ink Filling
Step 4: Assembling the Media Take-up Unit
Introduction
Installation
1. Assembly and Ink Filling
Checks before Operations
Step 1: Assembling the Stand
Step 2: Attaching the Printer Unit and the Stand
Step 3: Installing the Media Holders and Media Stays
Step 4: Assembling the Media Take-up Unit
1. Attach the arms.
2. Attach the control box and the left stay.
3. Attach the media holders.
4. Attach the cable clamps and the cable.
5. Install the dancer roller.
Step 5: Installing the Drain Bottle
Step 6: Removing the Retainers
Step 7: Connecting the Cables
Step 8: Preparing the Cleaning Liquid and the Ink
Step 9: Initial Settings and Ink Filling
2. Installing the Cutting Tool
3. Network Settings
4. Downloading and Installing Software
Appendix
Step 4: Assembling the Media Take-up Unit
1. Attach the arms.
2. Attach the control box and the left stay.
3. Attach the media holders.
4. Attach the cable clamps and the cable.
5. Install the dancer roller.
Introduction
Installation
1. Assembly and Ink Filling
Checks before Operations
Step 1: Assembling the Stand
Step 2: Attaching the Printer Unit and the Stand
Step 3: Installing the Media Holders and Media Stays
Step 4: Assembling the Media Take-up Unit
1. Attach the arms.
2. Attach the control box and the left stay.
3. Attach the media holders.
4. Attach the cable clamps and the cable.
5. Install the dancer roller.
Step 5: Installing the Drain Bottle
Step 6: Removing the Retainers
Step 7: Connecting the Cables
Step 8: Preparing the Cleaning Liquid and the Ink
Step 9: Initial Settings and Ink Filling
2. Installing the Cutting Tool
3. Network Settings
4. Downloading and Installing Software
Appendix
Feedback
Was this information helpful?
1
2
3
4
5
NO
YES
Any additional feedback to help us improve.
Feedback
Thank you
