Colors Are Unstable or Uneven
Did you shake the ink cartridges before installing them?
Shake new ink cartridges 50 times (about 20 seconds) with a stroke length of around 5 cm (1.97 in.) horizontally in each direction when shaking before you install them.
Are the operating parameters set to appropriate values?
Depending on the Printing Movement Range, the color may be unstable. Try setting Printing Movement Range to Full Width.
Was printing paused partway through?
When printing is paused, the coloring at the seam may be altered when printing resumes. Avoid pausing printing.
Printing may also pause when data is not sent from the computer quickly enough. We recommend not performing any other tasks with the computer while printing is in progress.
Printing pauses when ink remaining inside the machine runs out. Ensure that the remaining ink is sufficient before you begin printing.
Is the printer installed in a level and stable location?
Are you printing in a location subject to severe changes in the operating environment?
Large fluctuations in temperature or humidity while printing is in progress may cause the colors to change partway through the printing. When printing, use the machine in a location where the temperature and humidity are stable.
Is the object loaded correctly?
If the object to be printed on is not loaded correctly, output may be adversely affected. Load the object to be printed on correctly.
When Determining the Printing Position ManuallyDetermining the Printing Position Using Captured Images