Flat Table Dimensions
MEMO
The red dashed lines in the figure indicate screws that should never be removed.
MO-240
| a | 0 mm (0 in.) |
| b | 10 mm (0.4 in.) |
| c | 110 mm (4.3 in.) |
| d | 210 mm (8.2 in.) |
| e | 310 mm (12.2 in.) |
| f | 410 mm (16.14 in.) |
| g | 510 mm (20.08 in.) |
| h | 630 mm (24.80 in.) |
| i | 478 mm (18.82 in.) |
| j | 15 mm (0.59 in.) |
| k | 458 mm (18.03 in.) (printing area) |
| l | 610 mm (24.02 in.) (printing area) |
| m | 42 × M4 (for jigs) |
MO-180
| a | 0 mm (0 in.) |
| b | 10 mm (0.4 in.) |
| c | 110 mm (4.3 in.) |
| d | 210 mm (8.2 in.) |
| e | 310 mm (12.2 in.) |
| f | 410 mm (16.14 in.) |
| g | 478 mm (18.82 in.) |
| h | 325 mm (12.79 in.) |
| i | 15 mm (0.59 in.) |
| j | 305 mm (12.007 in.) (printing area) |
| k | 458 mm (18.03 in.) (printing area) |
| l | 24 × M4 (for jigs) |