Connecting an Alarm Lamp

You can connect an alarm lamp to this machine. The alarm lamp must be prepared by the user separately.

WARNING

Perform this task with all power switches left switched off.

Otherwise sudden movement of the machine may cause injury.

Procedure
  1. Turn off the machine's main power and sub power switches.
  2. Remove the cap () on the right side of the machine.
    WarningLamp1
  3. Attach the alarm lamp to the position where you removed the caps.
    WarningLamp2
    • : 2 - M8 tap
    • 20 mm (0.79 in.)
  4. Connect the alarm lamp wires () to the alarm lamp connectors ().

    While pressing the release button () with the included tweezers, insert the alarm lamp wire.

    WarningLamp3
  5. Lightly tug the wire of the alarm lamp to make sure it does not come loose.
  6. Turn on the machine's main power and sub power.
  7. Tap AP-640_Panel_Icon_SETUP Setup.
    Make sure that the alarm lamp turns on.