2. Perform a printing test to check the results.

Procedure
  1. Set up the object to be printed on.
    Determining the Print Surface Height and Printing Position
  2. Tap VG3_Panel_Icon_CLEANING Nozzle Drop-out Test on the home screen.
  3. Tap Execute next to Printing Test.
    Printing of the test pattern starts.
    MEMO

    Depending on the color of the object to be printed on, it may be difficult to check the white ink test pattern.

    Tap VG3_Panel_Icon_CLEANING Nozzle Drop-out Test on the home screen, select Cleaning - Printing Test - Nozzle Drop-out Test (Base: Black) in that order, and then tap Execute - Yes to make the base of the white ink black, making it easier to check the white ink.

    Nozzle Drop-out Test (Base: Black) is not displayed if the machine is not equipped with white ink.

  4. Open the front cover.
    MEMO

    Be sure to hold the handle of the front cover and keep holding it until the cover is completely opened or closed.

    If you do not open and close the front cover gently, it may break or you may be injured.

    CoverOpen2
  5. Check whether there is dot drop-out or dot displacement in the test pattern and whether its uneven colors have been eliminated.


  6. Close the front cover.
    MEMO

    Be sure to hold the handle of the front cover and keep holding it until the cover is completely opened or closed.

    If you do not open and close the front cover gently, it may break or you may be injured.

    CoverOpen2

    If no dot drop-out or dot displacement occurs and if there are no uneven colors, this operation is finished.

  7. Tap AP-640_Panel_Icon_HOME to return to the home screen.

If the dot drop-out or dot displacement location is different, perform medium cleaning another two or three times.

If this problem is not fixed, contact your authorized dealer.