2. Perform a printing test to check the results.

Procedure
  1. Set up the object to be printed on.
    MEMO

    The printing test requires an object with a W (width) of 170 mm (6.7 in.) or more and an L (length) of 90 mm (3.55 in.) or more. Set the bottom right of the object to the base point, and then carry out a printing test.

    Loading the Object, and Setting the Print Surface Height and Print Start Point
  2. Tap VG3_Panel_Icon_CLEANING Nozzle Drop-out Test on the home screen.
  3. Tap Execute next to Printing Test.
    Printing of the test pattern starts.
    MEMO

    Depending on the color of the object to be printed on, it may be difficult to check the white ink test pattern.

    Tap VG3_Panel_Icon_CLEANING Nozzle Drop-out Test on the home screen, and then select Cleaning - Printing Test - Nozzle Drop-out Test (Base: Black) to make the base of the white ink black, making it easier to check the white ink.

    Nozzle Drop-out Test (Base: Black) is not displayed if the machine is not equipped with white ink.
  4. Check whether there is dot drop-out or dot displacement in the test pattern and whether its uneven colors have been eliminated.


  5. If you have opened the front cover, close it.
    If no dot drop-out or dot displacement occurs and if there are no uneven colors, this operation is finished. Tap AP-640_Panel_Icon_HOME to return to the home screen.

If the dot drop-out or dot displacement location is different, perform medium cleaning another two or three times.

If this problem is not fixed, contact your authorized dealer.