2. Print only the crop marks.

Procedure
  1. Tap AP-640_Panel_Icon_MENU.
  2. Tap Media Settings - Cutting Settings - Crop Cut Position Adjustment.
  3. Tap VG3_Panel_Icon_Toggle_OFF next to Separate Test for Printing/Cutting with Crop Marks to turn it on AP-640_Panel_Icon_Toggle_ON.
  4. Tap Execute next to Printing Test.
    Printing of the test pattern starts.

    The crop marks are printed. When printing is finished, you will return to the original screen.

  5. Remove any media.
    Use the following procedure to separate the media.
    1. Close the front cover.
    2. Tap Change next to Output Start Location.
    3. Tap AP-640_Panel_Icon_DOWN to feed the media until there is a margin of 130 mm (5.12 in.) or more after the printed crop marks.
    4. Tap AP-640_Panel_Icon_BACK to go back to the previous screen.
    5. Tap Execute next to Sheet Cutting.
    6. Tap Yes on the confirmation screen.
  6. Complete operations before cutting output for normal cutting with crop marks, such as laminating.