Checking the Registered Media Settings

Procedure
  1. Tap AP-640_Panel_Icon_MENU.
  2. Tap Media Management.
    The registered media settings are displayed in a list.
  3. Tap a media setting.
  4. Tap List of Media Settings.
    The registered media setting values are displayed in a list.
    Menu item Reference page
    Print Head Height Changing the Print Head Height
    Feed Correction Manual Adjustment: Reducing Horizontal Bands (Feed Correction)
    Media Gap Adjustment Manual Adjustment: Adjusting the Misalignment of the Ink Landing Position (Media Gap Adjustment)
    Blade Adjustment Fine-tuning the Cutting Conditions
    Print & Cut Position Adjustment Correcting the Misalignment of Printing and Cutting
    Crop Cut Position Adjustment Correcting the Misalignment of Printing and Cutting with Crop Marks (Concurrent Test for Printing and Cutting with Crop Marks)Correcting the Misalignment of Printing and Cutting with Crop Marks (Separate Test for Printing/Cutting with Crop Marks)
    Cutting Distance Correction Performing Distance Correction during Cutting
    Over Cut Cutting to Make It Possible to Cut Corners Attractively (Over Cut)
    Heater Temperature Setting the Standby Heater TemperatureSetting the Output Heater Temperature
    Multi Sensor Adjustment Correcting the Reading Sensor
    Media Suction Force Using Media That Wrinkles Easily/Does Not Move Smoothly
    Printing Movement Range Speeding Up Output for Narrow Media
    Middle Pinch Auto Raise/Lower Use Middle Pinch Rollers When Pulling Back or Feeding Media
  5. Tap AP-640_Panel_Icon_HOME to go back to the original screen.