Setting the Standby Heater Temperature

Depending on the usage environment, the temperature of the dryer may become higher than the set temperature, but this does not represent a problem.

Procedure
  1. Check that the loading lever is raised.
  2. Tap the following location on the home screen.
    LG_Panel_TOP_Heater_unsetup
    The Standby Heater Temperature screen appears.
  3. Tap VG3_Panel_Icon_Toggle_OFF to turn Standby Heater Temperature on AP-640_Panel_Icon_Toggle_ON.
    LG_Panel_Preheater_on
  4. Tap AP-640_Panel_Icon_MINUS or AP-640_Panel_Icon_PLUS to set the Standby Heater Temperature.

    Temperature settings are not possible when Standby Heater Temperature is set to VG3_Panel_Icon_Toggle_OFF.

    A temperature that is too high may degrade the media or cause it to wrinkle.
  5. Tap Save to confirm your entry.
  6. Tap AP-640_Panel_Icon_HOME to go back to the original screen.
    MEMO

    • Default setting: Off