Cleaning Error (Drain Bottle)

This message appears when one of the following situations is detected.

  • The drain bottle is removed during execution of "Ink Renewal Inside Damper."
  • The drain bottle is removed during initial ink filling.
Operation cannot be continued. Perform the following operations.
  1. Check that the ink cartridges are inserted and that there is sufficient ink.
  2. Switch the sub power off and back on.
  3. Perform Ink Renewal Inside Damper or fill the machine with ink.
    MEMO

    If the printer stopped partway through Ink Renewal Inside Damper, perform Ink Renewal for the group ("A" or "B") with the white ink, and then perform Ink Renewal Inside Damper again.

    The space from "A" to "B" is Group A. The space from "B" to the right side is Group B.


    If the printing-test results are difficult to interpret

    Check the results in a bright location, changing your line of vision. They are visible using the reflection of the light.

If an Ink Cartridge Error appears during work, remove and reinsert the corresponding ink cartridge.