Cleaning Error (Ink Cartridge)

The printer made an emergency stop for one of the following reasons.

  • Ink ran out during "Ink Renewal Inside Damper."
  • An ink cartridge was pulled out during "Ink Renewal Inside Damper."
  • An ink cartridge was pulled out during the initial ink filling.
Operation cannot be continued. Perform the following operations.
  1. Check that the ink cartridges are inserted and that there is sufficient ink.
  2. Switch the sub power off and back on.
  3. Perform Ink Renewal Inside Damper or fill the machine with ink.
    MEMO

    If the printer stopped partway through Ink Renewal Inside Damper, perform Ink Renewal for the group ("A" or "B") with the white ink, and then perform Ink Renewal Inside Damper again.

    The space from "A" to "B" is Group A. The space from "B" to the right side is Group B.


    If the printing-test results are difficult to interpret

    Check the results in a bright location, changing your line of vision. They are visible using the reflection of the light.

If an Ink Cartridge Error appears during work, remove and reinsert the corresponding ink cartridge.