Jump to main content

1. Basic Handling Methods
2. Output Method
3. Optimizing Quality and Efficiency
4. Maintenance
5. Troubleshooting Methods
6. Appendix

Home
3. Optimizing Quality and Efficiency
1. Optimizing the Setup Method
Print Area Settings
Setting the Print Area Using the Center of the Print Area as the Base Position

1. Basic Handling Methods
2. Output Method
3. Optimizing Quality and Efficiency
4. Maintenance
5. Troubleshooting Methods
6. Appendix

Setting the Print Area Using the Center of the Print Area as the Base Position

1. Set the machine so that the print area is set each time before setting up the media.
2. Set the base printing position to the center of the print area.
3. Attach the object to be printed on.
4. The height of the object to be printed on is detected automatically.
5. Set the print area.

1. Basic Handling Methods
2. Output Method
3. Optimizing Quality and Efficiency
4. Maintenance
5. Troubleshooting Methods
6. Appendix

FA02108/R3-200316
Copyright © 2019-2020 Roland DG Corporation https://www.rolanddg.com/