Connecting an Alarm Lamp

You can connect an alarm lamp to this machine. The alarm lamp must be prepared by the user separately.
WARNING

Perform this task with all power switches left switched off.

Failure to observe this instruction may cause the machine to move suddenly, resulting in injury.

Procedure
  1. Check that the machine's main power and sub power switches are off.
  2. Remove the two caps () and the one screw () on the right side of the machine.


  3. Attach the alarm lamp to the position where you removed the caps.


    • : M8 type × 2
    • : 20 mm (0.8 in.)
  4. Connect the alarm lamp wires () to the alarm lamp connectors ().
    While pressing () with the included tweezers, insert the alarm lamp wire ().


  5. Pull on the alarm lamp wires to check that they have been securely connected to the machine.


  6. Turn on the machine's main power and sub power.
  7. Press [SETUP] and check that the alarm lamp turns on.