2. Change the base (home) position.

Procedure
  1. Press [FUNCTION].
  2. Press [▼] several times to display the screen shown below.


  3. Press [ENTER].
  4. Press [▲], [▼], [▶] or [◀] when the following screen appears.


    The flat table and the print heads move so that the pointer points at the previously set printing base position.
  5. Press [▲], [▼], [▶] or [◀] to move the pointer until it points to a position in the right foreground of the print area.


    MEMO:

    When the pointer is difficult to see

    Depending on the material of the object to be printed on, such as transparent media or high-gloss media with dark colors used on the print surface, the pointer may be difficult to see. In such cases, the pointer may become more visible by placing masking tape on the print surface or on the back.

  6. Press [ENTER].
    The base (home) position for printing is changed.
    The print heads return to the home position and the following screen is displayed.


  7. Press [FUNCTION] to go back to the original screen.