Alarm Lamp Connector

Pin assignment

CN	Signal name	Details
	+24 V	Power supply for the light, 50 mA max.
	ERROR	MotorError, ProtectMotorError, or temperature error.
	READY	Setup is complete and printing can start. When flashing, printing is paused.
	BUSY	Printing.

* Off: This indicates the standby status, warning status, or a similar status. The machine cannot start printing when it is in this status.

Connector assignment

Output specifications

Power supply	+24 V (150 mA)
Output	Open collector
Output capacity	50 mA max.

Connect the lamp between the 24 V power supply () and (), (), and ().