Step 4: Reinstalling the Machine

Procedure
  1. Once the preparations are complete, move the machine with as little delay as possible.
  2. Reinstall the printer immediately, and then remove the retainer securing the print heads and flat table in place.
    For storage, attach retainer A () and retainer B () using the retaining screws ().


  3. Turn on the main power switch.
    IMPORTANT:

    To prevent the print heads from being damaged, move the machine with as little delay as possible and switch on the main power as soon as possible after moving the machine. To install the machine again, follow the procedure in the Setup Guide.

  4. Press the sub power button.