Setting the Activation Interval for Sleep Mode (Power-saving Feature)

This setting is used to set how long it should take until the machine goes into sleep mode (the state in which the power-saving feature is working) when no print data is received and no operations are performed for a continued length of time.
  1. Press MENU.
  2. Press ▼ to display the screen shown below.


  3. Press ▶.
  4. Press ▼ several times to display the screen shown below.


  5. Press ▶ twice to display the screen shown below.


  6. Press ▲ or ▼ to select the time.
    You can set the value in units of 15 minutes from 15 minutes to 120 minutes.
  7. Press ENTER to confirm your entry.
  8. Press MENU, then ◀ to go back to the original screen.
    MEMO:

    When "SLEEP SETTING" is set to DISABLE, the machine does not switch to sleep mode, so this setting is ignored.