Performing Distance Correction during Cutting

This correction is performed when you want to accurately align the lengths of cut lines when cutting. This setting is also applied during cutting only, printing and cutting, or cutting with crop marks.

The movement distance of the media changes subtly depending on the media's thickness. This means that the length of a line when cut may differ from the length setting in the data.

Procedure
  1. Press [MENU].
  2. Press [▲] to display the screen shown below.


  3. Press [▶] once, and then press [▼] several times to display the screen shown below.


  4. Press [▶] twice to display the screen shown below.


  5. Press [▲] or [▼] to select the correction value.
    Set the correction value of the media feed direction.


  6. Press [ENTER] to confirm your entry.
  7. Press [◀], then [▼] to display the screen shown below.


  8. Press [▶] to display the screen shown below.


  9. Press [▲] or [▼] to select the correction value.
    Set the correction value of the cutting carriage movement direction.
  10. Press [ENTER] to confirm your entry.
  11. Press [MENU] to go back to the original screen.
    MEMO:

    • Default settings

      • FEED SETTING: 0.00%

      • SCAN SETTING: 0.00%