Basic Handling Methods
Basic Information
Part Names and Functions
About the Media Used
Menu List
Basic Operations
Power Supply Operations
Setup of Media
What to Do First after Installation
Checking before Output
Pausing and Canceling Output
Replacing Ink Cartridges
Output Method
Printing Method
Preparations before Printing Output
Printing Output
Cutting Method
Preparations before Cutting Output
Cutting Output
Printing and Cutting Method
Preparations before Printing and Cutting Output
Printing and Cutting Output
How to Cut with Crop Marks
Preparations before Cutting with Crop Marks
Cutting with Crop Marks
Optimizing Quality and Efficiency
Optimizing the Output Quality
Using the Correction Functions
Configuring Settings to Match the Properties of the Media
Accurately Adjusting the Cutting Settings
Accurately Adjusting the Settings for Printing and Cutting
Accurately Adjusting the Settings for Cutting with Crop Marks
Optimizing Work Efficiency
Using Presets
Adjusting the Output-start Location
Reducing Output Time
Using the Media Take-up Unit
Other Useful Functions
Optimizing Operation Management
Managing the Operations Appropriately and Efficiently
Managing the Basic Settings of the Printer
Maintenance
Introduction
Important Notes on Handling and Use
Basic Maintenance Knowledge
Regular Maintenance
Cleaning the Machine
Disposing of Discharged Fluid
Maintenance That Must Be Performed Daily
When Normal Cleaning Is Not Effective
Manual Cleaning
Cleaning That Must Be Performed Once a Month or More
Advanced Maintenance
When Uneven Color Issues Occur with White Ink
When Uneven Color Issues Occur with Ink other than White Ink
Handling Severe Dot Drop-out, Dot Displacement, and Uneven Colors
Replacing Consumable Parts
Replacing Parts for Maintenance
Replacing the Blade/Separating Knife
Inquiries for Consumable Parts and Products
Troubleshooting Methods
Output Quality Problems
Printed Results Are Coarse or Contain Horizontal Stripes
The Media Becomes Soiled When Printed
Colors Are Unstable or Uneven
Cutting Is Misaligned or Skewed
Printing and Cutting Are Misaligned
Problems in Cutting with Crop Marks
Automatic Detection of Crop Marks Fails
Printing and Cutting Are Misaligned
Media Feed Problems
Media Wrinkles or Shrinks
Media Feeding Is Not Straight
Media Feeding Is Not Smooth
A Media Jam Occurs!
Machine Problems
The Print Heads Do Not Move
The Printer Unit Does Not Run
Cannot Separate the Media
Messages on the Operation Panel
Messages
Error Messages
Appendix
Operations When Moving the Unit
Preparing to Move the Machine
Main Specifications
Printing/Cutting Area
About the Blade
Memo
Index
Search
Home
Output Method
How to Cut with Crop Marks
Cutting with Crop Marks
Step 3: Preparations for Cutting Output
Step 3: Preparations for Cutting Output
1 Prevent the media from being pulled with undue force.
2 Adjust cutting.
Output Method
Printing Method
Cutting Method
Printing and Cutting Method
How to Cut with Crop Marks
Preparations before Cutting with Crop Marks
Cutting with Crop Marks
Step 1: Batch Settings for Cutting with Crop Marks
Step 2: Starting Output with Crop Marks
Step 3: Preparations for Cutting Output
1 Prevent the media from being pulled with undue force.
2 Adjust cutting.
Step 4: Starting Cutting Output