Step 4: Performing Printing or Printing and Cutting

Follow the procedure below to select and print the job.
Procedure
  1. Check that the printer display is Ready to Print.
    HVW_print_ok_JP
    If the printer display is not Ready to Print, check the following items in the printer's user's manual.
    • Setup of Media
    • Preparations for Printing Output
    • Preparations for Cutting Output
    MEMO Each setup method varies depending on the printer. Carry out setup according to the procedure in the printer's user's manual.
  2. From the job list, select the job to be printed.
    HVW_job_select_JP
  3. Click 1_2_2_4_print_a.

    The Advanced Print Settings window appears.

    HVW_print_setting_JP
  4. Set the Print Count.
    HVW_print_times_JP
  5. Click Print.
    Processing by the RIP and printing are performed. In the job list, 1_2_2_job_status_once_printed_a is displayed next to jobs that have been printed.
    HVW_print_JP