Cutting in the Same Position Repetitively (Overlap)

Cutting is repeated several times at the same position with the same cut data. Use this setting for materials that cannot be cut through in a single pass, such as thick materials.

Procedure
  1. Press [MENU] several times to display the following screen.
    MENU_CONDITION
    MEMO
    When the material is loaded, press [MENU] several times to display the following screen.
    MENU_UNSETUP
  2. Press [▼] several times to display the following screen.
    MENU_OTHERS
  3. Press [▶].
  4. Press [▲][▼] to display the following screen.
    MENU_OVERLAP_OFF
  5. Press [▶].
  6. Press [▲] or [▼] to select a value.
    MENU_OVERLAP_OFF_OFF
    MEMO In addition to the normal cut, cutting is performed a number of times equal to the set value.
  7. Press [ENTER] to select the setting.
  8. Press [MENU] to return to the original screen.
    MEMO
    • Factory default setting: "OFF"
    • Setting range: "OFF", 1 to 10