Step 2: Install the Blade Holder

CAUTION

Never touch the tip of the knife.

Doing so may result in injury. The cutting performance of the blade will also be impaired.

Procedure
  1. Loosen the cutting carriage screw.
    GS2_BladeHolder_1
  2. Insert the blade holder.

    Confirm that the blade holder and the cutting carriage are engaged.

    GS2_BladeHolder_2
  3. Fully tighten the cutting carriage screw.
    GS2_BladeHolder_3
MEMO

Use the following link to view a reference video for this procedure.

Preparing the Blade
QRcode_cutter