Setting the Crop Mark Detection Speed for the AAS Sensor

Set the crop mark reading speed to be used when printing and cutting.
Procedure
  1. Press [SPEED].
    If material is loaded, press [ON/OFF LINE] to switch to offline mode.
  2. Press [▶] several times to display the screen shown below.

    The current value is displayed on the screen.


    MENU_Speed_AAS

  3. Press [▲] or [▼] to select the crop mark detection speed.
    You can choose from two levels of AAS detection speed: "Medium" and "Low".
  4. Press [ENTER] to confirm your entry.
  5. Press [ON/OFF LINE] to go back to the original screen.
    MEMO Default setting: "Medium"