Viewing System Information

Check the system information, including the firmware version, IP address, and MAC address.
Procedure
  1. Press [MISC].
    If material is loaded, press [ON/OFF LINE] to switch to offline mode.
  2. Press [▶] several times to display the screen shown below.
    Display screen Information


    		IP address assigned by the DHCP server on the network

    MENU_MISC_Sys_IP

    		 Manually set a static IP address for the cutting machine

    MENU_MISC_Sys_MAC

    		 MAC address of device

    MENU_MISC_Sys_communication

    		 Set the communication speed of the RS-232C cable

    MENU_MISC_Sys_FirmFPGA

    		 Firmware version

    MENU_MISC_Sys_Serial

    		 Device serial number
    MEMO For information on how to set up a network, see the Installation Guide.
  3. Press [ON/OFF LINE] to go back to the original screen.