2. Perform cutting

MEMO If the material comes loose or the machine operates unusually, press [PAUSE/RESUME] to cancel output. Then reload the material, starting over from the beginning.
Procedure
  1. If CorelDRAW is not running, start it.

    Open the target file if it is not currently opened.

  2. Click File - Print.

    The Print window appears.

  3. Click the General tab.
  4. Click the Printer pull-down menu, and then select GR2-640 or GR2-540 as the output destination.
    PrinterDriver_setting_CD_1
  5. Click icon_cd_print-drv.

    The printer driver properties window appears.

  6. Click the Cutter tab.
  7. Edit the cutting conditions ().

    Set other items () as necessary.

    Click Load to load cutting condition presets.

    Set_cut-param
  8. Click the Paper tab.
  9. Click Get from Machine.
    dlg_drv_paper-size

    The size (cutting area) of the material loaded in the cutting machine will be imported into Paper Size.

  10. Click OK.

    The printer driver properties window closes.

  11. Click the Color tab.
  12. Click the Color conversions pull-down menu, and then select GR2-640 or GR2-540.
    dlg_cd-print_color_jp
  13. Click the Layout tab.
  14. Click the Reposition artwork to pull-down menu, and then select Bottom left corner.
    dlg_cd-print_layout_jp
  15. Click Print.

    The data is output and cutting starts.