Displaying the Amount of Media Remaining

You can display how much of the media in use is left. By setting the amount of media currently remaining at the start, the amount remaining will be constantly displayed on the screen until it reaches zero.

If you remove the media or cancel media loading by raising the loading lever, the amount remaining at that time flashes on the screen. Because the amount of media remaining is not updated automatically when you change the media, redo the setting whenever you change the media. You can also set the machine to display this menu automatically whenever you change the media.

MEMO

The remaining amount that is displayed is only an estimate. Accuracy is not assured.

Procedure
  1. Press [MENU].
  2. Press [▼] several times to display the following screen.


  3. Press [▶], then [▼] to display the screen shown below.


  4. Press [▶] to display the following screen.


  5. Press [▲] or [▼] to set the current amount of media remaining.


  6. Press [ENTER] to confirm your entry.
  7. Press [MENU] to return to the original screen.


    • : This display is updated.
    • : If media has not been loaded, the set value flashes.
    MEMO

    Default setting: 0.00 m