Setting the Activation Interval for Sleep Mode (Power-saving Feature)

This setting is used to set how long it should take until the machine goes into sleep mode (the state in which the power-saving feature is working) when no print data is received and no operations are performed for a continued length of time.
Procedure
  1. Press [MENU].
  2. Press [▼] several times to display the following screen.


  3. Press [▶].
  4. Press [▼] several times to display the following screen.


  5. Press [▶] twice to display the screen shown below.


  6. Press [▲] or [▼] to set the time.
  7. Press [ENTER] to confirm your entry.
  8. Press [MENU] to return to the original screen.
    MEMO

    • Default setting: 30 Minutes