Correcting the Milling Position

The accuracy of the milling machine may change if it is used for a long period of time or the surrounding environment changes. Performing automatic correction will correct the ATC magazine and rotary axis positions.

Situations Requiring This Work

  • When installing or moving the machine
  • When replacing the spindle unit
  • When the milling position is misaligned
  • When symptoms such as a level difference or a hole in the Z direction occur in the milling results
Required items
DWX-53DC_DetectionPIN_ForTable Automatic_correction_jig Cloth_for_care
Detection pin Automatic correction jig Cloth for care
IMPORTANT

If automatic correction does not correct the milling position or if you need milling results with higher accuracy, we recommend that you perform manual correction.

If you perform automatic correction after manual correction, the correction value of manual correction will be initialized.